Home
Products
•General Purposes
TR Series
•Gel Batteries
TG Series
•High Rate Batteries
TH Series
•Deep Cycle Batteries
TD Series
•Stationary Batteries
TS Series
•Motorcycle/Snowmobiles/Jet Skis
BAB Series
•Battery Chargers & Accessories
BC Series
Company Info
•About Tempest  
•Contact Us
•Tempest Vision  
•Tempest Certification
•Warranty
Technical Info
•Technical Features
•Discharging
•Battery Life  
•Electrochemical Reactions
•Storage Conditions
•Battery Construction  
•Charging
•Temperatures
•Terminals  
Order Battery Online
Applications
Process
News
MSDS

 

Tempest Battery Charger

BC-12-5000F 12V 5.0Amp

IMC Intelligent / Smart Charger
Model No. : BC-12-5000F (12V5.0A)
3-stage microprocessor base charging system
Universal AC input voltages

 
 


Improper Connection
(Reverse Polarity)
Will Permanently
Damage Charger

 

**Click Here to Buy**

 

Specifications

1. Input Data:
1.1 Input Voltage & Frequency: Input Voltage 100~240VAC,Frequency 47Hz~63Hz;
1.2 Efficiency:More than 80%(load current of charger is 5.0A);
1.3 Input current:below 2.5A, when battery is being charger
1.4 Input Surge Current: When Voltage is 240VAC,Input Surge current is less than 50A;
1.5 Input Current Leakage: when voltage is 240VAC,leak current is less than 0.25mA;
 
2. Output Data:
2.1 Output Charging Voltage:
Maximum charging voltage:DC 14.8ą0.20V,float charging voltage DC 13.8Vą0.20V

2.2 Output Charging Current (limited current):
Rating charging current is DC 5.0A ,in range DC 4.5A----5.5A;
 
3-stage progressive charging program by steps:
1-Constant Current Charging: Raises battery voltage to reach about 80% full
2-Constant voltage Charging: Holds battery voltage at 80% and forces current to top
3-Float Maintenance: Maintain the fully charged battery at a proper working voltage
 
2.3 LED Display:
1st step : LED → green (indicates power on)
2nd step: LED → red (indicates bulk charge)
3rd step: LED → green (means battery is ready to use and charge turns to float charge mode)

2.4 Output Charging Characteristic:
Note: This chart is based on 1 12V38Ah battery. Charging time should be determined by battery amp hour capacity.
2.5 Short Circuit Protection:Shorting the outputs will not damage the charger.
2.6 Stability of Circuit:Charger performance will be stable within the input voltage ranges.
2.7 Caution: Reverse polarity (positive to negative or negative to positive) will damage the charger.
 
3. Mechanical Characteristics:
3.1 Materials used in construction
Case:PC+ABS black plastic
Input Plug: UL standard plug, 0.75*2 AC cable, length 47in.
Output cable: AWG18# ; PVC; 47in. black

3.2 Dimensions:Length 6in.  Width 2.8in. Height 1.8in.

3.3 Dropping Test
Charger dropped from 1.0m height to a 10mm pine board, repeat it for 4 times on each side;
Result: no crack / break, no damage; all related data remains correct.

3.4 Vibration Test:
The charger was placed on a Vibration desk:
Frequency: 5-55Hz
Range:ą1.5mm
Acceleration: 20m/s
Direction: X/Y/Z 3 directions
Test Time: 1h respectively
Result: no damage/degeneration, all related data remains correct.

3.5 High Voltage characteristics:
A high voltage of 3,000VAC between input and output terminal, current leak is less than
10mA,continue 60 seconds; 1 second on production line.
 
4. Others
4. 1 Stock Environment
Temperature : -25°C----+70°C;Humidity:5% - 90%;

4. 2 Work Environment
Temperature:- 0°C----+40°C, Humidity:5% - 90%;
 
5.Out put Connectors
 
 


©2005 All Rights Reserved - Tempestbatteries.com